Daily use and maintenance of Shanghai electric blast drying oven How to maintain the air temperature constant temperature drying oven 1. The blast air temperature drying box should not over-extrude the contents of the box, and must leave room for natural convection of the air so that the humid air can be on the wind top. Accelerate escape.
2. Do not put flammable materials in the blast oven with no explosion-proof device.
3. When using the blast air temperature drying oven, do not touch the electrical parts of the space on the left side of the box with your hands or use a damp cloth and rinse with water. The power should be cut off during maintenance.
4. The blast air constant temperature drying oven must pay attention to whether the power supply voltage used is consistent before use. When using, the power outlet ground wire must be grounded as specified.
5, the blast air constant temperature oven power cord can not be wrapped around metal objects, can not be placed in high temperature or wet places, to prevent rubber aging and leakage.
6. The blast air temperature drying oven should regularly check whether the silver contact of the temperature regulator is hairy or uneven. If it is, use the fine gauze to level the contact and then use it, and always wipe it with a cleaning cloth to make it touch. Good (note that the power must be turned off). Do not hit the metal pipe of the indoor temperature regulator to avoid affecting the sensitivity.
7. After each use, the power supply must be cut off, and the inside and outside of the box should be kept clean. Hang the corresponding logo after cleaning.
2. Do not put flammable materials in the blast oven with no explosion-proof device.
3. When using the blast air temperature drying oven, do not touch the electrical parts of the space on the left side of the box with your hands or use a damp cloth and rinse with water. The power should be cut off during maintenance.
4. The blast air constant temperature drying oven must pay attention to whether the power supply voltage used is consistent before use. When using, the power outlet ground wire must be grounded as specified.
5, the blast air constant temperature oven power cord can not be wrapped around metal objects, can not be placed in high temperature or wet places, to prevent rubber aging and leakage.
6. The blast air temperature drying oven should regularly check whether the silver contact of the temperature regulator is hairy or uneven. If it is, use the fine gauze to level the contact and then use it, and always wipe it with a cleaning cloth to make it touch. Good (note that the power must be turned off). Do not hit the metal pipe of the indoor temperature regulator to avoid affecting the sensitivity.
7. After each use, the power supply must be cut off, and the inside and outside of the box should be kept clean. Hang the corresponding logo after cleaning.
The ergonomic design of the penis head is very pointed which makes it very easy to insert if you are a beginner or are warming up.
The phenomenal suction cup is moderate enough to hold the dildo firm in place for a hands-free play even with a quite vigorous usage.
The dildo/penis is made from reliable material for safe usage, it is nice and flexible for the most perfect positioning to fully satisfy.
The balls of penis feel solid and realistic which is a great feature that really improves the experience to the next level.
Artificial Penis,Realistic Artificial Penis,Lifelike Artificial Penis,Silicone Artificial Penis
Dongguan Chenkuang Biological Technology Co., Ltd , https://www.cksexdoll.com