The industrial use of the centrifuge Zui headache is one thing, that is, the centrifuge is used in chemical raw materials for a long time, the centrifuge corrosion problem encountered, and now we recommend four measures to prevent or can reduce the corrosion of the centrifuge.
*, the choice of the material of the centrifuge is very important because of different materials and separation requirements, you need to choose a different model. After the model and main parameters are determined, according to the corrosion resistance of different materials in different environments, comprehensive physical and chemical factors, cost performance and other factors are combined to determine the strength component materials from the basic surface. From the material itself, the target material it targets is safe.
Second, the mechanism design of the centrifuge, an excellent design can extend the service life of the equipment and ensure the safety of the equipment. For the structural design, the design defects that are easy to accelerate corrosion are stress concentration tendency and gap environment, sometimes in the metal soaking solution. The corrosion rate is small; however, the formation of the gap will cause severe crevice corrosion due to changes in the chemical and electrochemical states of the internal solution.
Third, the surface protection measures of the centrifuge The basic idea of ​​controlling corrosion is to isolate the corrosive environment. In the design of centrifuges, surface treatment methods such as flange, galvanizing, chrome plating, and electroless plating are often used. These methods are effective in many environments, but for rotating parts, an important phenomenon must be noted: matrix The material and the coating are two materials, and their linear expansion coefficients are different, which will produce different deformation amounts when the rotating member is elastically deformed, thereby causing a large number of microcracks; if the above phenomenon exists, the corrosion formation will be accelerated. Therefore, the method of surface protection for rotating parts should be used with caution.
Fourth, the use of corrosion inhibitor centrifuge itself involves multidisciplinary, the use of centrifuges, in addition to the above measures, should also pay attention to study its application environment. The application of corrosion inhibitors is also widely used in practical applications. For some harsh environments, the use of appropriate corrosion inhibitors can make the parts suitable. As long as the process permits, the use of corrosion inhibitors should be an effective way for centrifuge applications.
Through the above 4 points, the centrifuge can be well protected and more resistant to corrosion, making the centrifuge more durable and safer.

Absorbent is also called absorbent. This substance can make the active ingredient adhere to the surface of its particles, and make the liquid trace compound additive become a solid compound, which is beneficial to the uniform mixing. It is a solid substance which can adsorb some of its components effectively from gas or liquid. It has large specific surface area, suitable pore structure and surface structure, strong adsorption capacity for adsorbate, generally does not react with adsorbate and medium, is easy to manufacture and regenerate, and has excellent adsorption and mechanical properties. Adsorbents are generally used in industrial production, so adsorbents can be divided into six categories according to the common industrial use.

1. silica gel, it is mainly used for drying, gas mixture and separation of petroleum components.

2. alumina, it is also a dehydrating adsorbent.

3. activated carbon is mainly used for water treatment, decolorization and gas treatment.

4. polyacrylamide is mainly used for domestic sewage and organic wastewater.

5. zeolite molecular sieve for gas adsorption separation, gas and liquid drying;

6. carbon molecular sieves mainly act as transport channels, while micropores play the role of molecular sieves.

Our Services

1. OEM(????) service is available.

2. Fast producing time.

3.Cheapest price forproduces.

4. Reply promptly in 24 hours.

5.Free sample available.

FAQ

Q1: product specifications?

A: we will pack the product specifications according to your needs.

Q2: Do you have some videos where we can see the line production?

A: Yes, we can provide some videos for reference. (yes, we can provide some videos).

Q3: How about payment terms? What kind of payment terms do you have?

A: 30% TT deposit + 70% TT before shipment, 50% TT deposit + 50% LC bala

Nce, Flexible payment can be negotiated.

Q4: what advantages do you have?

A: the quality of the products we offer can be guaranteed and will provide you with very competitive prices.

If you have any questions, please contact with us directly. Organic Intermediate are produced by HRT bearing With High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, please send mail directly to us.


Adsorbents

Water Adsorbents,Chemical Adsorbents,Detergent Adsorbents,LPG Adsorbents

Shandong Chenyi Environmental Protection Technology Co.,Ltd , https://www.chenyichemistry.com