(1) The water tank should be placed on a fixed platform, the power supply voltage of the instrument should be 220V, and the power socket should be a three-hole installation socket.

And the ground wire must be installed.

(2) Before the water is added, the cutting material is connected to the power supply, and during use, the water level must be higher than the stainless steel partition. Do not water or the water level is lower than the partition heating, otherwise the heating tube will be damaged.

(3) If the constant temperature control fails, the silver contact on the controller can be polished with a fine abrasive cloth to work.

(4) Do not allow water to flow into the control box during water injection to prevent electric shock. After use, the water in the tank should be cleaned and wiped clean.

Keep it clean to extend its life.

(5) Zui uses purified water to avoid scale formation.

BPAP 30

The BPAP System makes a good performance in Neonatal Intensive Care Units (NICU) and other departments. Offer you the choices you need in ventilation, monitoring and technique. what`s more, our expertise in ventilation is based on rich 23-year history of developing BPAP solutions that meet your needs. Good performance based on High Security, High Accuracy, High Stability and accurate monitoring.

BPAP 30,Ventilator Non Invasive,Non Invasive Ventilation Equipment,Non Invasive Vent Equipment

Shenyang RMS MEDICAL TECH CO.,LTD , https://www.medicalrms.com