To make the diesel engine run normally and disperse the large amount of heat that the fuel supply system burns to work, cooling water is required to circulate heat. Currently, well water or tap water is commonly consumed in urban and rural areas. As a result, urban and rural motorcycle drivers and agricultural operators have used well water and tap water as diesel cooling water. In fact, the use of well water, tap water to cool the diesel engine is not good. Well water and tap water contain a lot of minerals, and the chemical elements that are most harmful are called calcium and magnesium salts. We call water that generally contains large amounts of calcium and magnesium salts as "hard water", water that contains only small amounts or no calcium and magnesium salts as "soft water," and the amount of calcium and magnesium salts that are contained in water as "hardness." "To represent. Water hardness can be divided into "temporary hardness" and "permanent hardness" two. Therefore, after the well water and tap water are put into the diesel water tank, the water temperature rises to boiling after a long time. The water will decompose to produce water-insoluble sediments, which adhere to the cooling system waterway cylinder head, cylinder liner, and waterway inner wall. This is The "permanent hardness" produced by calcium and magnesium is scale. There is scale in the cooling system, which will seriously affect the cooling of the body, causing the body temperature is too high, bad air intake, power drop; at high temperatures, the lubricating oil becomes thin and the lubrication is poor, parts are not evenly distributed, resulting in the body "speed", cylinder The head and cylinder liner ruptured and even caused an explosion. Therefore, urban and rural tap water, well water, and hawthorn water and mud mortar containing more calcium salts and magnesium salts cannot be directly used as cooling water, but clean river water, rainwater, and snow water should be used. If there is no river water and rainwater at a time, it can be used as cooling water after being cooled by boiled water in the well water and tap water, and the minerals in the “wellness” part of the original well water and tap water can be eliminated. If a large amount of scale has been generated, it should be injected into the water channel with a 25% hydrochloric acid solution under the guidance of the relevant technicians. After 10 minutes, it should be placed on the net. If it is hard to clean, it can be repeated several times. Repeatedly wash with clean water to prevent hydrochloric acid solution corrosion of metal objects.

Breast Injection, we are specialized manufacturers from China, Breast InjectionBreast Filler Injection suppliers/factory, wholesale high-quality products of Hyaluronic Acid Breast Injection R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!

Breast injection is long lasting, but not permanent. 

Depending on the product used, the injection area treated and the individual dispositions of your skin, the results can last from 12 months up to 18 months.

You will see results immediately; however, some swelling and redness is not uncommon and, as such, the immediate result should not be regarded as the final result. Best results are seen after 2-3 days.

Natural, Beautiful, You---Auro Secret

Breast Injection

Breast Injection,Breast Enlargement Injection,Breast Fillers,Breast Enhancement Injections

Auro Technology Limited ,