Now the entire market is entering the era of intelligence, and for the canned food packaging, it also faces the opportunities and challenges brought by intelligence. Here we will talk about some specific manifestations of the flatness of food cans and bottle mouths in intelligent production;

1. Canned food bottle filling: The automatic production line has high requirements on the verticality of the bottle, and the verticality is the guarantee of uniform filling. Otherwise, the bottle will fall and affect the production process.

2. The canned food bottle cap, the verticality of the bottle and the flatness of the bottle mouth have a significant impact on the quality of the gland. When the flatness of the bottle mouth is poor, there may be problems such as tilting of the gland, gap and poor sealing.

How to test the flatness of food cans?

1. Food canning bottle mouth flatness tester Test principle: simply fix the bottom of the bottle on the rotating plate of the horizontal plate, make the bottle mouth contact with the dial indicator, rotate 360° to read the large value of zui and small zui The value, 1/2 of the difference between the large value of zui and the small value of zui is the vertical axis deviation value.

2. Food canning bottle mouth flatness test method:

(1) The food can bottle is clamped on the horizontal rotating chassis to make the bottle mouth contact with the dial indicator.

(2) The maximum value and the minimum value are read by rotating 360°, and 1/2 of the difference between the maximum value and the minimum value is the value of the vertical axis deviation.

(3) If the bottom plate with the V-shaped block is used, the sample is pressed against the V-shaped block, and a downward pressure is applied to the sample in the direction of 45° from the horizontal plane, and the glass bottle can be rotated. 360°.

(4) Make a note of the maximum and bottom distance between the outside of the edge of the bottle and the fixed point. The vertical axis deviation is half the difference between the measured maximum and minimum values.

(5) The accuracy of the measured value shall be not less than 0.1 mm.

(6) Correct the vertical axis deviation obtained by the actual measurement according to the accuracy.

The food can bottle mouth flatness tester meets the QS certification requirements of the food industry. Whether it is from the national level or from the rectification actions of many places, the food packaging safety should be worthy of attention of the manufacturers. The food canner manufacturer should pass the self-examination and find out The problem is solved, and the problem is solved, so that the QS certification can be successfully handled.

Single Dome Halogen Operating Light belongs to full refelection Operation Theatre Lights . 



1.The halogen reflective shadowless lamp is widely used in various operation lighting occasions in hospital and clinics. 

2. Full close streamline lamp-body design of the halogen operation theatre light completely meets the demand of the sterilization and high standard of laminar flow purification in operation room.

3. Adopting more than 5280 slices of reflection mirror, guaranteeing 1200 mm lighting depth.

4. Lighting color of the Single Dome Halogen Operating Light is close to natural sunlight and helps the doctor to operate surger clearly and accurately.

5. The back-up bulb will start work within 0.2 seconds automatically in case the main battery is dead, ensuring the continuation of surgical operation. There`s failure indication in the handle control panel to recommend the bulb to be changed after operation.

6. The detachable handle jacket can be used for high temperature (≤134℃) sterilized.

7. Digital-control circuit offers many functions, with 10 segment brightness selection  stepless lighting regulation, brightness memory, low voltage

start-up and power on self test etc.

8. The life-span of OSRAM halogen bulb is up to 1500 hours. The bulbs can be changed easily.

9. High thermostability Germany ORSAM  lamp socket.

10.Balance arm can be optional Germany imported or domestic.

11. mould Die-casting Eight edge type Revolving arm.

Types of the lamp domes have 500mm diameter dome and 700mm diameter dome for Choice

Installation way: Ceilling installation type and floor standing type for Choice


Full reflection-1

Our company

photobank (1)

Shangdong province is the main machinery production base in China. 

KANGERJIAN Medical Technology Co., Ltd. is a group of senior lighting  design expert and machinery manufacturing expert company with 20years experience and factory locating in the east city--the hometown of confucius--Qufu in Shandong province, China.


The Company has passed the ISO:9001:2008 quality system certification, ISO13485:2003 quality system certification, CE certification and CFDA certification, so that the enterprise management standards and product quality is relatively connected to expand the international market for enterprises to lay the foundation.

Our main products: Operation Theatre Lights, Double Dome Halogen Operating Light, Single Dome Halogen Operating Light, LED Operating Light , Surgical Operating LED Light , Gynecology Examination Tables , Obstetric Delivery Bed , Electrical Gynecological Table , Delivery Examination Table , Electric Hydraulic Operating Table, Electric Medical Operating Table, Surgical Table , Operating Table , Operating Theatre Pendants , icu tower crane in ICU room, LED Viewbox etc. professional medical equipment.


The quality of casting by me, the market led by me! Excellent from professional, KANGERJIAN people lead the new trend of medical equipment.

photobank (6)



Single Dome Halogen Operating Light

Single Dome Halogen Operating Light,Halogen Surgical Light,Mobile Halogen Exam Surgical Lights,Halogen Shadowless Lamp

Shandong Kang'erjian Medical Technology Ltd. ,