High concentrations of fuel oil and lube oil in winter, poor fluidity, icing of cooling water and freezing of snow on the road surface, make it difficult for the tractor to start, lubricate and travel. Therefore, in addition to the prescribed technical maintenance and driving operations, the following technical requirements must be strictly observed.
(1) Before the winter, all parts of the tractor should be descaled, cleaned, adjusted and lubricated, and the technical status of the engine should be comprehensively checked. Valve clearances, injection pressures, etc. that do not meet the requirements must be adjusted to the specified range. In particular, the oil supply time must not be too late. It is easy to cause starting difficulties when it is too late. A comprehensive inspection and adjustment of the clutches, brakes, and operating mechanisms is also needed to prevent accidents in the snow and frozen roads.
(2) Replace fuel and lubricants with winter oil. It should be replaced with diesel that has a freezing point below the local temperature of 5 to 10 degrees Celsius. When refueling, it must be strictly filtered. The oil in the oil pan should be replaced with No. 8 oil, the gear oil in the gearbox and the rear axle should be replaced with No. 20 gear oil. It is strictly forbidden that the lubricant in the governor casing exceeds the specified oil level to prevent the speed of the vehicle from being caused.
(3) Adjust the proportion of battery electrolyte. The specific gravity of the electrolyte was adjusted from 1.25 to 1.26 for summer use to 1.28 to 1.29. In the high-cold area, it can be adjusted to 1.30 to 1.31. It is necessary to conduct a comprehensive inspection and maintenance of the electric starting system.
(4) Heat the water to warm the body before starting the engine. Use the method of heating water while putting water on the side until the body drain valve flows out of warm water. Close the drain valve and use the crank to turn the crankshaft for dozens of turns so that all parts are full of oil and lubricated. It is forbidden to bake the engine with an open flame and start without cooling water. After the engine is started, it is necessary to extend the warm-up time and add a heat-insulating curtain before the radiator to ensure that the working water temperature reaches 80°C or more. Long-term work at low temperatures is not allowed.
(5) After parking at night, when the water temperature drops to 50°C, open the drain valve, place a net cooling water, and use a crank to crank the crankshaft several times until no water flows out. Do not close the drain switch. Some of the pilots were able to save time by leaving the locomotive open after the water switch was turned on, often resulting in an accident that caused the body to clog and the cooling water was not released, causing the body to freeze. There are also parking stalls that put water, causing the engine to cool and the body burst.
(6) Strictly abide by the use of operating procedures. Prepare skid chains, triangle mats and other anti-skid tools before leaving the car. When you are on a frosty road, drive slowly. When going uphill, use a gear that can go up to avoid midway shifts. When there is snow, you should pay attention to the edge of the curb. Don't take a risky drive.

Adult Diaper Insert Pads

1) High speed absorption of the SAP to keep the diaper surface dry.

2) Soft non-woven surface:Using the softest materials to make products, insure that the quality is good.

3) Designed to fit the body, with elastic at the legs.

4) Leak guard to prevent the leakage.


size 240x560mm
packing 10pieces per bag
type inner pack

Our service:

-Style, color, size, weight and material can be customized as per your order.
-Competitive and favorable price absolutely meets customers` requirements.
-Over 10 years' trading experience and good reputation in trading credit, product quality and after-sales service from our clients all over the world.
-Package can be designed as per customers` demands and printed with customers' brand name and logo.
-OEM or ODM orders are welcome; private label is available.
-Free sample and flexible delivery



Tianjin Jiao Rou Sanitary Product company is mainly supply adult products, and we have 20 year's experience. 

And we have exported a lot and have more experience in this line.


straight inner pad



Straight Inner Pad

Straight Inner Pad,Medical Straight Inner Pad,Straight Stripe Shape Inner Pad,Straight Adult Inner Pad

Tianjin Jiao rou Sanitary product company , http://www.tjsanitary.com