1. Check all components before use. In particular, check whether the rotary knife is installed with the fixing bolt and universal joint lock pin. When checking the rotary cultivator, the power must be cut off. When replacing rotating parts such as blades, the tractor must be turned off. 2. Before the tractor starts, the rotary cultivator clutch handle should be set to the disengaged position. To connect the power in the ascending state, after the rotary cultivator has reached the predetermined speed, the unit can start and slowly lower the rotary cultivator to make the rotary cultivator into the soil. It is forbidden to start directly with the rotary tiller in case of soil, so as to prevent the rotary tilling knife and related parts from being damaged. It is forbidden to rapidly descend the rotary tiller, and it is prohibited to reverse and turn the rotary tiller after entering the soil. 3. When the turning of the ground does not cut off the power, the rotary cultivator must not be lifted too high. The transmission angle at both ends of the universal joint must not exceed 30 degrees, and the engine speed should be appropriately reduced. When transferring the land or walking long distances, the power of the rototiller should be cut off and locked after it is raised to the highest position. 4. When the rotary cultivator is in operation, people are strictly prohibited from approaching the rotating parts, and no one behind the rotary cultivator is allowed to prevent the blades from throwing injuries. 5. During operation, if the cutter shaft is wrapped around too much grass, it shall be stopped and cleaned in time to avoid increasing the load of the implement. When rotating tillage, the tractor and the suspension part are not allowed to take people to prevent accidental injury by the rotary cultivator. Sixth, the rotary cultivator is relatively large in size, the body part is more prominent, when on the road, should be driven at low speed, strictly abide by the rules of road traffic, in order to avoid the accidents such as scraping, rubbing, collision, collision.
Leaf Class,Ginkgo Biloba,Eucommia Leaf,Types Of Leaves Class
Henan Qiancuntang medicial technology co.ltd. , https://www.qctchineseherb.com