1. The connection between the single hoe plough and the tractor is made by hanging the plough on the traction frame through the traction pins.
2. Plough adjustment and use
(1) Adjusting the plow's soil entering angle and tillage depth: Rotate the plow depth adjustment handle clockwise, the soil entering angle becomes smaller, and the tillage depth also decreases; otherwise, the tillage depth increases.
(2) Tillage width adjustment: Adjust the tillage width adjustment handle to the left or right, so that the plough body swings to the left or right to achieve the purpose of adjusting the width of the tillage. At the same time, it is also possible to adjust the different track distances of the tractor to adjust the width of the tractor.
(3) Partial traction adjustment: If the tractor automatically takes one side away, it is called partial traction. The main reason is that the lengths of the two adjustment bolts on the traction joint are improperly adjusted and therefore cannot be driven straight. If you are leaning to the left, adjust the right adjustment bolt and adjust the left adjustment bolt; if you are skewed to the right, the opposite is true. After adjustment, adjust the head of the bolt and the draw frame to maintain a clearance of about 1.5 mm and lock the nut.
3, matters needing attention
(1) In dry farming, the soil is harder and works in the 1st or 2nd gear. When the paddy field is hydroponic, the soil is soft and the 2nd or 3rd gear is used.
(2) When the temporary resistance is increased in the cultivation, and the driving wheel slips seriously, the plough can be lifted slightly to pass; if the slippage is not serious, the throttle can be increased. If you increase the throttle is invalid, then downshift work.
(3) When cornering or turning back, reduce the throttle and plow.
2. Plough adjustment and use
(1) Adjusting the plow's soil entering angle and tillage depth: Rotate the plow depth adjustment handle clockwise, the soil entering angle becomes smaller, and the tillage depth also decreases; otherwise, the tillage depth increases.
(2) Tillage width adjustment: Adjust the tillage width adjustment handle to the left or right, so that the plough body swings to the left or right to achieve the purpose of adjusting the width of the tillage. At the same time, it is also possible to adjust the different track distances of the tractor to adjust the width of the tractor.
(3) Partial traction adjustment: If the tractor automatically takes one side away, it is called partial traction. The main reason is that the lengths of the two adjustment bolts on the traction joint are improperly adjusted and therefore cannot be driven straight. If you are leaning to the left, adjust the right adjustment bolt and adjust the left adjustment bolt; if you are skewed to the right, the opposite is true. After adjustment, adjust the head of the bolt and the draw frame to maintain a clearance of about 1.5 mm and lock the nut.
3, matters needing attention
(1) In dry farming, the soil is harder and works in the 1st or 2nd gear. When the paddy field is hydroponic, the soil is soft and the 2nd or 3rd gear is used.
(2) When the temporary resistance is increased in the cultivation, and the driving wheel slips seriously, the plough can be lifted slightly to pass; if the slippage is not serious, the throttle can be increased. If you increase the throttle is invalid, then downshift work.
(3) When cornering or turning back, reduce the throttle and plow.
Hot Pepper,Dry Tianying Chilli,Special Hot Pepper,Hot Chili Pepper
NINGXIA KOFOLON INTERNATIONAL CO.,LTD. , http://www.kofolon.com