1. Improve the temperature of diesel engine cooling water The normal water temperature of agricultural diesel engine is 65-95°C. However, the current temperature of diesel engine water is generally lower than 45°C, so that the oil can not be completely burned and the viscosity of oil is large, which increases the running resistance of the diesel engine. More oil. The solution is to increase the temperature of the diesel cooling water.
2. Ensure the best fuel advance angle
The best angle of advancement angle for the 195 diesel engine is 16-20 degrees. When the diesel engine is used for a period of time, due to the wear of the plunger coupler and the injection pump transmission member, the advance angle of the fuel supply is reduced and the fuel consumption is greatly increased. The solution is to ensure that the advance angle of the fuel supply is greater than the optimal angle.
3. Keeping the machine free from oil leakage At present, the diesel engine oil pipe often has oil leakage due to uneven joint surfaces, gasket deformation, or damage. Solution: 1 Apply gasket sand to the gasket and smooth it on the glass plate to calibrate the tubing connector. 2Increase the diesel recovery device. Bicycle spoke caps can be used instead of hollow screws to weld on the tank. Plastic pipes can also be used to connect the return pipe on the nozzle to the hollow screw so that the return oil flows into the tank.
4. More than half of the failures of the diesel engine before the oil was purified were from the oil supply system. Solution: 1 The diesel bought back should be set aside for 2-4 days, and 98% of the impurities in the diesel can be precipitated when it is used again. 2 If you buy it now, put two layers of silk or toilet paper on the fuel tank filler screen to remove impurities.
5. Changing the "big horse-drawn car" approach The common phenomenon of "large machines with small pumps" on wells is actually a waste of energy. Improvement measures: appropriately increase the number of diesel engine pulleys, increase the speed of the pump when the diesel engine is running at a reduced speed, and increase the flow, lift, and shaft power to achieve the purpose of energy saving.
6. Adjust the fuel injection pressure of the injector
The injection pressure of the 195 diesel fuel injector is 120 kg/cm2. When the injection pressure is less than 100 kg/cm2, the fuel consumption will increase by 10-20 g/kWh. The pressure on the injection pump can be checked and adjusted directly with a comparison method.
This classification summarizes the Spirulina Phycocyanin produced by our own factory in northwestern of China .
We have advanced equipment and strict quality control system to ensure the quality and production.
The products under the classification are:
1. Spirulina Phycocyanin Powder .
2. Natural Blue Edible Pigment .
Various parameter specifications of our product:
Naturland Certified ; CERES certified .
EU & NOP standard ; Kosher & Halal Available .
Low heavy metals & Micro Contents , Low & Stable PAH4 Level ,
PAH4 value is less than 10 ppb .Low microorganismsNon-Irradiation ,
Non GMO , Gluten Free , Allergen Free , Pesticides Free .
Own Factory : Manufacture in northwest of China . Legitimacy , Regularity , Cultural .
Own Lab : Quality control and Product development . Strictly , Creativity , Responsibility .
About Company
Yanchi County Yijian Biotechnol Co.,Ltd
was founded in Dec 2012 ,
by Mr. Dezhi Zhang ,
the legal representative of the company .
Company registered capital is 10 million RMB .
The main business sectors are culture , processing , internal sales , import and export trade of Organic Spirulina and Organic Chlorella products .
Yijian is known globally as one of the major suppliers of microalgae products across the world .
Annual production rate is 600 Mt .
Average annual sales income is around 5 million dollar .
Spirulina Phycocyanin
Spirulina Phycocyanin,Spirulina Extract Phycocyanin,Blue Spirulina Phycocyanin,Natural Spirulina Phycocyanin
YANCHI YI JIAN BIOLOGICAL PROJECT CO.,LTD , http://www.spirulina-yj.com