1. Pay attention to soil conditions. Bio-potash fertilizer works best on loamy soils rich in organic matter, alkali-hydrolyzable nitrogen, and available phosphorus. It is not recommended for sandy soils that are too loose or soils with poor water and nutrient retention. Soils with available potassium levels below 100 ppm will benefit the most from bio-potash application, as it helps improve potassium availability and supports better crop growth.
2. Consider irrigation areas. In fields with good irrigation facilities, bio-potash fertilizer can significantly boost crop yields. However, in dryland areas without irrigation, the microbial activity of the bio-potash may not function properly, leading to reduced effectiveness in converting and releasing soil potassium and phosphorus. Studies have shown that using bio-potash in high-nutrient fields with ample nitrogen and phosphorus can help balance nutrient supply and enhance overall yield.
3. Prioritize its use on multiple cropping systems and crops like sorghum, which tend to respond well to biological potassium fertilizers. These crops often require additional potassium support during their growth cycles, and bio-potash can provide a sustainable source of nutrients.
4. When storing and applying bio-potash fertilizer, avoid direct sunlight. Seed coating should be done indoors or under a shed to protect the microorganisms. The inoculant seeds should be dried in the shade, not under the sun. The seed dressing should be applied on the same day it is prepared to maintain the viability of the bacteria.
5. Bio-potash can be combined with chemical fertilizers such as urea, ammonium nitrate, ammonium sulfate, potassium sulfate, and potassium chloride for top-dressing. However, it should not be stored after mixing; it must be used immediately. Avoid mixing it with alkaline materials like wood ash, as this can harm the bacterial cultures and reduce the fertilizer's effectiveness.
6. After applying bio-potash to the soil, a period is needed for the microbes to break down and release potassium and phosphorus from the minerals. To ensure that these nutrients are available from the early stages of plant growth, it’s important to apply the fertilizer early—ideally before planting. Field trials have shown that base application, seed treatment, root dipping, and transplanting all lead to better results when done prior to soil preparation. If applying as a top-dress, it’s best to do so early in the seedling stage. The later the application, the less effective it becomes.
7. Apply the bio-potash close to the roots, as the closer it is to the root zone, the more effective it will be in supporting nutrient uptake by the plants.
8. Be mindful of the temperature and environmental conditions. Maintaining optimal moisture and temperature levels around the roots will help the microbial agents perform at their best, ensuring maximum efficiency and long-term soil health.
Viral Transportation Medium Tube
Uses: used for the detection and sampling of influenza, hand, mouth, foot and other epidemic diseases
Inspection principle:
The combination of multiple antibiotics has broad-spectrum antibacterial and antifungal effects;
As a protein stabilizer, bovine serum albumin can increase the survival time and infection stability of the virus;
Buffers such as Hank's build a neutral environment, which helps to increase the survival time and infection stability of the virus;
Phenol red is an acid-base indicator, the discoloration area is 6.6 (yellow)~8.0 (red), and it is red at 7.2~7.4.
Steps:
1. According to the sampling requirements, use a sampling swab to collect samples.
2. Place the swab after collecting the sample into a sterile sampling tube.
3. Break the sampling swab rod that is higher than the sterile sampling tube.
4. Tighten the cap of the sterile sampling tube.
5. Label the sterile sampling tube with information as required.
For sample collection, transportation and storage.
Product advantages:
1. The virus discretion of the flocking swab is high to ensure the accuracy of the test results.
2. The samples are well sealed to ensure product transportation and safe storage.
3. Product instruction manual, product certificate
Product Details:
1. The product set includes a one-time Virus Sampling Tube (including preservation solution), a self-sealing bag, a sampling swab, and instructions.
2. Product specification: 100 sets/box, 8 boxes/box 3. Product weight: 0. 65kg/box, 13. 2kg/box
4. Packing size: 25. 5*23. 5*14. 5 boxes, 53*49*32/carton
Scope of application:
Work resumption testing, the best choice for large-scale population screening
Features:
1. Transport at room temperature, stably preserve viral RNA
2. Pre-packaged guanidine salt lysate can inactivate the new coronavirus, ensuring the safety of transportation and testing personnel 3. The large-capacity preservation solution can fully soak the swab head,
The sample size can be divided into three parts for testing and reserve samples respectively to meet the testing needs.
Scope of application:
Suspected cases, disease control testing, preferred by P3 laboratory
Viral Transportation Medium Tube,Sample Collection Tubes,Transport Nasal Swab With Tube,Virus Sampling Tube Nasopharyngeal Swab
Jilin Sinoscience Technology Co. LTD , https://www.jlgkscience.com