Sansevieria native to ten drought-prone Africa and southern Asia, sexual warm and humid, resistant to drought, hi light and shade tolerance. The demand for soil is not strict, and sandy loam with good drainage is preferable. Its optimum growth temperature is 20-30°C, and the wintering temperature is 10°C.

Potted orchid plants can be mixed with rot leaf and garden soil in equal amounts and add a small amount of mature basal fertilizer as a substrate. It grows well under well-lighted conditions. Except for midsummer, it must avoid direct sunlight. Other seasons should receive more sunlight. If it is too dark in the room, the leaves will be dark and lack vitality. In addition, if placed in the room for a long time, it is not appropriate to...> Tiger-tailed orchid is native to ten drought-prone Africa and southern Asia, and it is hi, warm, moist, resistant to drought, hi light and shade-tolerant. Good sandy loam is good, its optimum growth temperature is 20-30 °C, and the wintering temperature is 10 °C.

Potted orchid plants can be mixed with rot leaf and garden soil in equal amounts and add a small amount of mature basal fertilizer as a substrate. It grows well under well-lighted conditions. Except for midsummer, it must avoid direct sunlight. Other seasons should receive more sunlight. If it is too dark in the room, the leaves will be dark and lack vitality. Seed China reminds you: If you are placed in a room for a long time, you should not suddenly move directly to the sun. You should move to a place where the light is better, so that you can see the sun after adjusting to prevent the leaves from being burned. Watering should be appropriate, to grasp the principle of never drying wet. Usually wipe the leaf dust with clean water to keep the blades clean and bright. When the new plants are sprouted at the root neck in spring, they should be properly watered to keep the pots moist. During the high temperature season in summer, the pots should be kept moist. After the end of the fall, the amount of water should be controlled and the pots and soils should be kept relatively dry to enhance the cold resistance. It does not require high levels of fertilizer, and applies 1-2 thin liquid fertilizers each month in the growing season to ensure that the leaves are thick and green.

Cultivation conditions

Hi warm climate, suitable temperature for growth is 20-30 °C, not cold, stop growing below 13 °C, overwintering temperature should not be less than 8 °C, when the ambient temperature is too low, often from the base of the leaves rot, causing the death of the entire plant. Hi light, but the summer must be protected from the sun. The demand for soil is not strict, and well-drained sandy loam is better.

Conservation Guide

● Although it is very shade-tolerant, it will be dark and old, and it will grow slowly and even fall weakly. When removing from the shade, avoid directly setting the light more than the feet, otherwise the blade will be sunburned.

● Sansevieria is native to arid regions and can adapt to drought and water shortages. Avoid waterlogging. When there is too much water, the color of the leaves will become lighter, and even the roots will die. During the growth period, we must master the principle of “do it with wetting rather than wetness”. We only need to keep the potted soil wet and control the amount of water after the fall to enhance the cold resistance.

● During the growth period, nitrogen and phosphorus combined fertilizers are applied once every half month. When nitrogen fertilizers are applied for a long time, the leaf surface will become dark.
● Cultivated soil can be made by mixing rot leaf and garden soil in equal amounts.

Reproduction

Divided by breeding method. The ramets were changed in spring and autumn, and the plants were removed from the pots to shake off most of the soil. After the rhizomes and fibrous roots were sorted, the rhizomes between the mother and the sub-strains were cut off with a knife. During the operation, damage to the root system should be avoided as much as possible so that the divided sub-strains have a certain number of root systems. After planting the sub-plants, they should be placed in a semi-shade location in the room to prevent rain and watering, so as not to cause incision rot. After the new leaves are grown, they are transferred to normal maintenance.

A large number of propagation of Sansevieria can be used for cuttings. Cuttings are carried out from May to July. Select robust and enriched leaves and cut them to a small section of 5-7 cm. (The whole leaf cuttings can also be used). The cut section should be placed in a dry and cool place. For several days, after the incision is dry, insert it in a straight line or obliquely in the medium. The depth of insertion is one third to one half of the length of the leaf segment. When cutting, pay attention to the position of the cuttings, and if they are inserted, they will not take root. At 15-25°C, roots and rhizomes are grown from the base of the wound approximately 1 month later and gradually grow into new strains. When the seedlings grow 2-3 leaves, they can be planted on pots. In the case of yellow-striped varieties, the sub-strains produced by leaf cutting cannot maintain the good habits of the mother. The yellow bands disappear, and they can only be propagated by the ramets method.

Straw Toothbrush

Straw Toothbrush,Wheat Straw Toothbrush,Wheat Straw Toothbrush Set,Eco-Friendly Straw Toothbrush

Yangzhou Tongfun Red International Trading Co,Ltd. , https://www.i-ecbio.com