Mechanical cold storage is the main form of commercial storage at present, and it is suitable for mechanical refrigeration in all parts of the country, gradually becoming a widely used storage method without being affected by environmental conditions.
As a long-term storage of grapes, there are red earth, excellent seedless, Ruibier, Qiuhei, longan, rose fragrance and Jufeng series and Other varieties. As a storage grape, during the growing season, it is necessary to strengthen pest and disease control, increase phosphorus and potassium fertilizers, and timely and reasonable summer shearing to ensure good ventilation and light transmission. At the same time, the water should be controlled within one week prior to harvesting to keep the soil under the racks properly dried to increase the sugar content of the berries. Timely late harvest, the later the harvest period, the higher the sugar content of berries. At the same time, the late harvested grapes, in particular the high sugar content of berry berries after a light frost. Timely late harvest, the later the harvest period, the higher the sugar content of berries. At the same time, the grapes harvested in the evening, especially after one or two light frosted grapes, have thick peels, good coloring, and full fruit powder formation, which is more resistant to diseases and resistant to storage. When the berries are harvested, they should be selected after sunny morning dew and dry, or choose the morning or the evening when the temperature is lower.
When harvesting grapes, they should be graded while mining, while loading baskets or boxes, strictly removing sick ears, diseased grains, and cutting off broken grains. Paper or plastic bags should be lined with baskets (boxes), but plastic bags are the best. When putting the grapes in the code, they must be tightly packed between the ears to prevent shaking during transport, damage the ear and fruit, and create opportunities for infection. Post-harvest to cold storage pre-cooling room. In the pre-cooling room, a single layer is placed, and the pre-cooling is quickly cooled in 24 hours. When the ear temperature drops below 5°C, it enters the official storage. After storage, cool down as soon as possible to reach -0 °C. During the storage period, it is stable at this temperature and the relative humidity is maintained at 85%-90%.

Portable Magnetic Separator


Introduction:

The Portable Magnetic Separator is the most popular model which used in seed, grain, flour mill plant to remove magnetic materials such as iron pieces, iron screws, iron nuts etc. it is portable, because it has very small size and easy to put on other equipment. it has a magnet cone which has high magnet strength, all magnetic materials will stick on the cones when grain passing by. so you should clean it after use for a while.


Features of Portable Magnetic Separator :

Compact Structure

Can be used independently or use with other equipment

Stainless steel or Carbon steel body available.

Different capacity available. 


Specification: 

Model

Diameter of Drum

Diameter of Inlet

Height of Machine

Capacity

efficiency

Strength of magnet

TCXT200

200mm

120mm

370mm

5t/h

99.99%

5500guass

TCXT250

250mm

130mm

500mm

8t/h

TCXT275

275mm

150mm

500mm

15t/h

TCXT300

300mm

180mm

600mm

20t/h

TCXT330

330mm

200mm

600mm

30t/h

Txct Magnetic Separator

Portable Magnetic Separator

Portable Magnetic Separator,Magnetic Separator Drum,Cereal Magnetic Separator,Magnetic Separation Machine

SHIJIAZHUANG SYNMEC INTERNATIONAL TRADING LIMITED , https://www.seedgraincleaner.com