Steam generator function principle: The fan motor on the upper part of the air conveying pipe absorbs air through the pipe and is squeezed. The air carries a large amount of heat and humidity required during the extrusion process. Air is then transported across the baffle into the fermentation chamber. This design ensures an even distribution of air from top to bottom, providing an optimal fermentation state for the entire fermentation environment.
Economic advantages: The steam generator is equipped with a good steam system, which uses electrodes to produce extremely fine steam water molecules without heating tubes. The durability of the operation is guaranteed, as the water quality (regardless of the hardness of the water) does not weaken the function and service life of the evaporator.
Guaranteed bread quality: The steam generator ensures the best quality of the bread by uniform fermentation in the fermentation chamber. An isolated steam ejector with adjustable steam volume ensures fast and accurate steam volume without excess.
Application of steam generator: The heat of fuel sent to the boiler is lost in various forms except for the effective use. It includes: heat loss from the exhaust; carbon monoxide and hydrogen that are not burned out in the exhaust. And incomplete combustion heat loss caused by methane and other gases; incomplete combustion heat loss and heat loss caused by unburned carbon contained in fly ash, slag and grate leakage. In order to assess performance and improve design, boilers are often subjected to heat balance tests. The method of directly calculating the thermal efficiency of boilers from the effective use of energy is called positive balance, and the method of calculating efficiency from various heat losses is called counterbalance. When considering the actual benefits of the boiler room, it is necessary to consider not only the boiler thermal efficiency but also the energy consumed by the boiler auxiliary machine.
Characteristics of the steam generator: Minimize the fineness of the pulverized coal while ensuring the output of the flour. Appropriately reduce the primary air pressure to increase the primary air temperature as much as possible. Ensure sufficient secondary air volume. The intermediate air baffle opening is appropriately opened while the combustion is kept stable to sufficiently mix the wind powder. Under the condition of ensuring steam temperature, steam pressure and load, the rotation speed of the upper layer feeding machine is appropriately reduced, and the rotation speed of the lower layer feeding machine is increased. Appropriately increase the temperature of the powder pulverized coal. As far as possible, avoid the occurrence of coal and coal breakage in the milling system, ensure the stability of the operation of the milling system, maintain reasonable ventilation and reduce the air volume.