The earth is rejuvenating, the weather is getting warmer, and the spring ploughing is in progress. Here, I will talk to the farmers’ friends about some of the essentials of the agricultural machinery during the spring broadcast:
First, carefully prepare before the broadcast:
1. Before planting, you should carefully check the plots and make sure you have a good idea to ensure the quality of work and mechanical safety.
2, prepared seeds, fertilizers and vulnerable mechanical parts, so as not to delay planting, delay farming time.
3, the seeds must be dry and clean, not mixed with straw, stones and other debris, so as not to block the seeding mouth, affecting the quality of sowing. When sowing seeds, the seeds must be carefully selected and the fertilizers should be cleaned, otherwise the quality of sowing and fertilizing will be affected.
4. Place the seed fertilizer in the proper position on the ground to avoid delays in adding seeds and fertilizer.
Second, planting should be careful
1. The seeding machine should avoid parking when working. When parking is required, the planter should be raised and retracted a distance before planting. When descending the planter, the tractor is to be carried out slowly. When the opener is placed in the soil, the seed drill must not be retracted to prevent blockage or damage to the opener.
2. When the ground turns, the planter should be raised, the power of the metering device and the fertilizer device should be cut off, and the rowing and opening device should be raised.
3, the manipulator should observe the operation status of the planter at any time during the operation, pay special attention to whether the seed meter is arranging; whether the fertilizer is drained; whether the seed or the fertilizer tube is blocked; whether there is a seed box or a fertilizer tank Sufficient species, fertilizer, etc.
4. After a crop has been broadcasted, the seed box should be carefully cleaned to avoid seed mixing and causing seed failure, resulting in waste of seeds, which will cause difficulties in future field management. After the seeding is completed, the fertilizer tank should be cleaned in time to prevent corrosion of the machine.
5. When seeding seeds with pesticides, the seeding personnel should wear protective tools such as gloves, masks and goggles. The remaining seeds should be disposed of in a timely manner so as not to pollute the environment and cause harm to humans and animals.