(1) Breeding and selecting fine strains of good strains: First, species is better, with high yield, high quality, resistance to stress (including resistance to diseases and insects) strong characteristics; Second, high purity, no pests. The most fundamental thing is to cultivate new varieties and new strains with strong resistance to diseases and insects; third, the appropriate age of bacteria. Aging strains not only have poor viability, but also have a high chance of contamination. When selecting strains, if the latter two points are neglected, it is often one of the major causes of serious infection by pests during the seed production period or the germination period. Such as mushroom straw slim, not dense, fast growth, but easy to aging, autolysis. If the mycelia in the bottle shrinks, or some of the mycelia appear to be autolyzed, or if the bacteria age is more than 30 days, it is an aging strain. After sowing the old strains, not only the hyphae recover slowly, but the growth potential is poor, the yield is low, and they are susceptible to pests and diseases. Therefore, the bacterial age should be about 20 days. The suitable bacterial age of the mushroom strain is to use the mycelium after it has been grown over the bottle, and it is generally used in 45 to 50 days. With this strain, the mycelium germinates quickly after inoculation, the living ability is strong, and the pollution rate is low.
(2) Adjust the pH of the edible fungus to meet the pH requirement. In addition to the straw alfalfa, most of them prefer the acidic or neutral environment. Most pathogens prefer a neutral or alkaline environment. Therefore, when making strains, appropriate amount of superphosphate can be added and the medium can be adjusted to a little acid, which can inhibit the occurrence of germs and provide a certain amount of phosphorus for the edible fungi. In the mushroom bed, if found some of the alkali conditions of the bacteria, such as white mold, brown mold, can be directly sprinkled in the surface of the material on the incidence of superphosphate.
After straw mushroom sowing, the culture material has the tendency to change from acid to alkali. According to the characteristics of straw mushroom like alkaline environment, it can be combined with water spray and after harvesting each mushroom, spraying with lime water of pH9 to meet the growth of straw mushroom. The need for pH can also inhibit the competition for nutrients with straw mushrooms. Occurrence of spooky umbrellas of moisture. Because Coprinus likes acidic environments, they grow poorly in neutral or slightly alkaline environments. Some of the mushrooms in the neutral or slightly alkaline environment can also grow well, such as mushrooms and oyster mushrooms. The raw materials used for cultivation (straw, cottonseed hulls, etc.) can be prepared with 1% to 2% lime water, and can also be used after harvesting mushrooms. Lime water (supernatant) spray.
(3) Strengthen the cultivation and management, improve the resistance to disease and insect resistance of edible fungi The management of the fungus should be aimed at promoting the growth of edible mycelium and inhibiting the occurrence of bacteria. The main measures taken are:
1 Proper cooling culture most of the bacteria is hi-temperature, except for edible mushrooms and straw mushrooms, the required temperature is lower. Therefore, the culture temperature after inoculation should be controlled below 25°C. Appropriate cooling culture, although the mycelium growth rate is slow, but strong and powerful, but the bacteria significantly reduced.
(2) Hygrometric cultivation Edible fungus requires relatively low relative humidity in the growing period of mycelium. Therefore, the relative humidity in the air during the germination period should be maintained at about 60%, which can effectively inhibit the occurrence of germs.
3 Turning piles in a timely manner Check the inoculation 7 days after the inoculation, and found that the bacteria bag infected by the bacteria can be injected into the affected area with 75% alcohol or 1:3 formaldehyde solution. If the infection is serious, the application should be slightly larger than the original bacteria bag. The bag is fastened, re-sterilized and inoculated. Do not take the contaminated cartridges out of the bag and dry them in the sun to allow the spores of the pathogen to fly around, causing serious re-infection.
Management of fruiting period should pay attention to scientific water use, and unclean water is the medium that can spread germs. Therefore, the water management of the mushroom house is to ensure that the water is clean. In the case that it is difficult to guarantee, it can be sprayed with a bleach solution of 150 mg/L. The second is to promote the control of water spray, which is more and more, the less is less. After the soil is covered, it should be lightly sprayed and ground sprayed, and the mushroom water should be sprayed when the mushroom is ready. To the mushrooming period, mushrooms are sprayed more often and less when the mushrooms are sprayed.
Mushroom bed should be combined with ventilation after spraying water. Most of the pathogens are like high temperature and high humidity. Once disease occurs in the mushroom bed, water spray should be stopped and the ventilation volume should be increased.
In addition, suitable ecological conditions such as light, temperature, water, and gas in the mushroom house should be adjusted so that the mycelium of edible fungi grows robustly, enhances the viability and improves the resistance, and can thrive and inhibit the occurrence and spread of germs.

natural herbal to relied pain of arthritis pain reliever

Product description

 

capsicum plaster is refined from more than 20 Chinese medicinal herbals through unique traditional processing technique and modern biological technology that provides effective pain relief for up to 24 hours. The ingredients can effect heat, which help to dispel coldness and dampness trapped in the joints and muscle to promote healing power for Arthritis. The patch has a obvious effect on activating and promoting blood circulation, dispersing bruises, arresting hemorrhage and reducing muscle inflammation and swellings, dispelling wind-cold, soothing the tendons.

 

Working theory

 

Based on traditional Chinese Medicine and the studies of experts, the Arthritis Plaster uses High-Tech and is an effective herbal plaster with scientific background. The medicament`s curing effect can last for 12 hours. After 12 hours` applying, let your skin have a rest, do not apply another Arthritis Plaster for 6 hours in the same skin area. After letting the skin rest for 6 hours, you can use another Arthritis Plaster on this skin area. The Arthritis Plaster focusing on activating the blood circulation. 

The Arthritis Plaster contain special active substance, bioactive factors, can active organ functions, improve microcirculation, accelerate the absorption of nutrition, and convert path

ological cells into healthy cells. It can active the formation of cells, which can amend the pathological gene and change it into the normal gene. Therefore the plaster can relieve pain and inflammations as well. Pain Relief Patch    

The magnet in the center of the patch can produce magnetic waves (the wavelength is about 4-14 m),which can pass through the skin 8-12 cm in depth and do the magnetic treatment

 

Products Name

capsicum plaster

Size

7cm*10cm,8x11cm or customized

Color

Skin Color

Ingredients

 

Lysimachia trientaloides Hemsl, Forrest Silkvine Stem or Root,

Caulis Impatientis etc

Indications

 

For auxiliary treatment of Cervical Spondylosis, Rheumatism ,Lumbar sprain,strain of lumbar

muscles and legs or feet pain symptoms.

Range of application

For external use only. Apply it onto your knee,ankle and sole as well as

neck and shoulders.

 

Advantages:

 

1. Totally Safe Using the pain relief patch , the medicament can go through into the skin avoiding any side effects to the stomach, intestines, liver and kidney caused by oral administration. 

2. Unique ingredients

The plaster contains ingredients which can alleviate pain, and improve the healing from the source of the pain. The unique ingredient is a confirmation of its prominent and curative effect. 

3. Convenient Application 

Paste the plaster directly onto the source of the pain, the ointment will not overflow and has no residue on the skin. The plaster does not fall off and will not stain clothing. Its safe and hypoallergenic. 

 

Instructions:

 

1. Clean the skin, tear the protective paper and paste the plaster onto the pain or discomfort area

2. The medicament`s curing effect can last for 12 hours. After 12 hours` applying, tear the Arthritis Plaster down, let your skin have a rest, do not apply another Arthritis Plaster for 6 hours in the same skin area. After letting the skin rest for 6 hours, you can use another Arthritis Plaster on this skin area.

3. One treatment period is 20 days.

 

 

Caution:

 

1. A few people have a sensitive skin, stop using that, there is no need to do.               

2. To Use only as directed, avoid contact with the eyes, mucous membranes, rashes, wounds or damaged skin  3. If you are pregnant or nursing a baby, consult a physician before using pain relief patch .

 

 

 

Pain Relief Patch

Pain Relief Patch,Arthritis Pain Relief Patch,Herbal Pain Relief Patch,Transdermal Pain Relief Patches

Hebei Houde Hanfang Medical Devices Co., LTD. , https://www.hodafhealth.com