The most advanced filling and sealing unit series designed and manufactured by the most advanced filling and sealing cans of the can filling machine. The same is the use of pneumatic control automatic cover without tank contact, using equal liquid surface filling technology, the production capacity is frequency control, more than 95% of the appearance of stainless steel, to ensure the beauty and hygiene requirements of the machine. In order to improve the vacuum inside the tank, the steam injection device can be configured according to customer requirements, and a remote monitoring system can be equipped to ensure maximum technical support to customers.
First, the working principle of the can filling machine
The filling system includes an exhaust valve, a filling cylinder, a liquid level control device, a cylinder for filling the valve, and a height adjustment device for the filling cylinder. The power comes from the capping machine. After changing the speed ratio by the first-stage sprocket drive, it is transmitted to the reducer, the output shaft of the reducer is driven, and the filling cylinder and related components are driven. The conveyor belt is self-contained, and the conveyor belt is equipped with a capping machine. The tank system includes a tank screw, a tank stop device, a tank star wheel and various baffle components. Including liquid distributor, gas distributor, gas control cabinet and liquid and CIP pipeline. On the peripheral peripheral bracket of the filling machine, various devices for controlling the opening of the filling valve.
Second, the application of cans filling machine
It is intended for the filling of two-piece cans for beverages and beer containing CO2 gas and three-piece cans such as eight-treasure porridge herbal tea. The frame is used to support, install the drive system and other components, and there are protective covers around the machine. It is suitable for hot filling production of various juice drinks and tea beverages, and at the same time, it can be used for the filling of pure water and mineral water by replacing a small number of parts.
Third, the characteristics of the can filling machine
The main technical parameters can be sealed: 10 pieces. Filling head: 36. Production capacity: 0-400 cans / minute. Applicable tank height: 90-133mm. Applicable tank diameter: 52.5-82.5mm. Motor power: 7.5kw. Dimensions: 2700*1700*1900mm. The imported frequency converter is used to adjust the production speed, the pneumatic cover and the screw are used to control the automatic lower cover, and the remote computer control system can be equipped to ensure the full technical support to the customer. To increase the vacuum inside the tank.