The packaging process includes major processes such as filling, wrapping, and sealing, as well as related pre- and post-processes such as cleaning, stacking, and disassembly. In addition, the package also includes processes such as metering or stamping on the package. The use of mechanical packaging products can increase productivity, reduce labor intensity, meet the needs of large-scale production, and meet the requirements of sanitation. Packaging machinery has a variety of classification methods. According to the function, it can be divided into single-function packaging machine and multi-function packaging machine; it can be divided into inner packaging machine and outer packaging machine according to the purpose of use; it can be divided into special packaging machine and general packaging machine according to the variety of packaging; semi-automatic machine according to automation level And fully automatic machines.
Mainly introduce the following points:
1. What is the reason why the shrinking machine heats up slowly or cannot rise to a higher temperature (above 160 degrees Celsius)?
Answer: The line of the heater is that the main power line passes through a magnetic absorbing switch and then to the electric heating tube. Therefore, it is necessary to first check whether the contacts of the magnetic absorbing switch are normal. The above phenomenon occurs if the line does not pass one of the phases. If the magnetic switch is normal, you can check the meter again to see if the phase and the ohmic value of the machine are the same. If it is normal, it should be a short circuit. If the phases are all connected but the line or heating tube is still abnormal, the heater needs to be replaced.
Second, when the equipment is working, the film material is easy to shift and can not be properly fed. How to adjust?
A: If the film material is offset in the equipment, and the position of the adjustment film roll and the tension balance bar are invalid, the problem can be solved by adjusting the angle of the upper triangular plate. The upper layer of film material is offset from the entrainment chain, and the upper triangular plate can be adjusted in a clockwise direction; the following layer of film material is offset from the entrainment chain, and the upper triangular plate can be adjusted counterclockwise.
Third, when packaging 6 bottles of bundled packaging, the electric eye can not detect the packaging, the machine is easy to cut into the packaging when working, how to adjust?
Answer: The gap between the bottles of the bundle packaging will affect the detection of the electric eye. At this time, the angle of the horizontal electric eye can be adjusted to an oblique angle. The adjustment can reduce the probability of the electric eye detecting the gap of the package, thereby avoiding the chaos in the work.