What are the precautions for the fume purifier assembly?
1. Anti-leakage measures should be taken at the joints of all air ducts. To ensure the effectiveness of the device's infection.
2. The variable diameter air duct adjacent to the air inlet and outlet of the equipment should be as smooth as possible to ensure the infection efficiency of the equipment. Straight pipes that are more than four times longer than the pipe diameter must be assembled and connected by a smooth pipe.
3, so the air duct of the equipment light fan must be connected with a soft connection. Vibration of the equipment while it is running will not function properly.
4. In order to ensure the result of the infection, the individual fan air volume is supposed to be larger than the intended air volume of the equipment. The equipment must be operated under the intended air volume, and the user can use the frequency converter to control the fan or install the air conditioning valve device at the fan air outlet.
5. To reduce the additional resistance of the fan. The inlet of the fan is preferably kept in a straight section of 1-2 meters.
6, the equipment should work in a negative wind pressure state, in order to ensure the effectiveness of the device's infection. That is, the fan must be located in front of the equipment.
7. When the air is exhausted by a unified exhaust fan, when multiple devices are used in parallel. It is also necessary to ensure that the proportion of airflow allocated to each device is close to the proportion of the wind volume that he intends to handle.
8, should be installed with rain, sunshade awning, outdoor assembly. This saves the normal operating life of the equipment and increases the maintenance cost.