Corn is the main food product of the world and an important agricultural economic crop of our country. In recent years, China's rural economy tends to be stable and high-quality development. The emergence of agricultural machinery cooperatives and the farmers' awareness of agricultural machinery have made the popularity of agricultural machinery more and more high. This has not only greatly improved the efficiency of agricultural production, but also liberated it. Rural productivity.
Among the many agricultural machinery, the corn sowing and fertilizing machine as one of them can complete the work procedures such as sowing and fertilization at one time, which can effectively improve the efficiency of corn sowing, but in the use and maintenance of corn precision seeding and fertilizing machinery. There are many precautions that require the user and the operator to raise awareness during use to ensure the working capacity and service life of the corn planting fertilizer machine.
First, Baodong corn sowing fertilizer application notes
1. Safety inspection of key components before work
Before the planting work, the Baodong brand corn planter should be carefully inspected according to the training requirements of the manufacturer and the sales organization.
First, check whether the lubricating oil is sufficient for important mechanisms such as the gearbox. If it is insufficient, it should be added to the required amount in time. For the chain drive, the oil should be lubricated before work. For the open gearbox, grease lubrication should be applied, and pay attention to whether the chain drive and the belt drive tensioner are properly tensioned. For fixing parts such as fastening bolts, screws, and split pins, the corresponding reliability should be checked, and the looseness and damage should be handled or replaced in time.
2. Agronomic adjustment of working parts should be done before work
In order to ensure the efficiency and stability of the work of Baodong brand corn planting fertilizer machine, the main components of the planting should be adjusted reasonably according to the actual situation before the operation. The main work is as follows:
1) According to the instructions of the planting fertilizer machine and the adjustment of the seeding quantity according to the actual needs of the local, rational use of the seeding sprocket. The degree of slippage of the ground wheel of the corn sowing and fertilizing machine is directly related to the soil moisture, soil quality and the surface of the sundries. Therefore, in the actual work after the adjustment of the seeding quantity, it should also be carefully observed whether the planting plant spacing meets the requirements. If the requirements are not met, the fertiliser sprocket should be replaced until the expected requirements are met.
2) After earnestly researching the amount of fertilizer required for the corn variety, adjust the amount of fertilizer to be adjusted accordingly, carefully adjust the working length of the outer trough, open the fertilizer excavator in situ, and check the amount of fertilizer discharged from the fertilizer excavator. Is it suitable?
3) Since the depth of corn planting and fertilization has a certain influence on the development of corn plants, the sowing and fertilization should be adjusted to a suitable depth before work to ensure a reasonable depth of sowing and fertilization, and appropriate for covering soil and repressing mechanism. Adjustments to ensure agronomic requirements.
3. Care should be taken to observe the working conditions of each component during work.
The working experience and analytical ability of the corn sowing and fertilizing machine operators are directly related to the use of the planter, and the good judgment ability can avoid mechanical damage and failure. In the process of operation, you should pay careful attention to the mechanical speed, listen to the sound of the engine and transmission components is normal, if there is abnormal sound, you should stop and check in time, and carefully observe whether there are entanglement and blockage, etc. If it exists, it should be dealt with in time.
4. Cleaning after work and its precautions
After completing the sowing operation, the corn planter should carefully clean up the sundries and dirt on the surface of the machine, take out all the seeds in the seed box and store them properly, and discharge all the fertilizers in the fertilizer box and collect them. The seed box and fertilizer box do some cleaning work.
Second, Baodong corn planting fertiliser maintenance considerations
(1) Due to the different working conditions of the seeding and fertilizing machine, the lubrication of the main transmission parts should be carefully observed during operation. When the joint parts of the universal joint shaft are relatively dry, butter should be added in time to ensure good lubricity. At the same time, check whether the rotating parts are involved in weeds or other stolen goods. If they exist, they should be removed in time.
(2) When the corn sowing and fertilizing machine is working on the road and in the field, try not to load too much other unrelated items, try not to carry out overspeeding and overloading work, and carry out overloading and overspeeding for a long period of time, resulting in the transmission parts of the planter being affected. Excessive force and poor lubrication conditions can increase the wear of critical components and shorten the life of the engine. At the same time, the lower parts such as the opener and the seed meter should be raised when turning the ground to avoid damage caused by bumping.
(3) When carrying out the seeding operation, the seeds placed in the seed box should be as uniform as possible and free from impurities, so as to ensure efficient discharge of the seeds and avoid the occurrence of leakage and clogging. At the same time, in the process of using, when the seed in the seed box is less than one-fifth, the seed should be added and the seed should be evenly distributed in the seed box to ensure the continuous and smooth discharge process.
In short, the corn sowing and fertilizing machine plays an important role in ensuring the high yield and good harvest of corn. Only by mastering the correct use and maintenance methods can we ensure the working efficiency and working effect of the corn planting fertilizer machine, and create corn production at the beginning of planting. A good foundation to increase the yield and quality of corn.