It is well known and regretful that “short-lived” is a phenomenon. Can it “reappear” or “multiple”? This has to study and change the flowering habits of thistle flower. This is an epiphyte in the subtropical forest. Its special form, the plant has only leafy branches without leaves (the leaves have degenerated), the flowers are large and long, white and scented. Alfalfa is easy to cultivate and manage, as long as it is based on its habits. Doing the following points will make it more flowering.

1. The pot soil should be properly wet and dry. The pot soil should not be too wet. It should not be arid. When it is in the dormant state in winter, it should be controlled that the pot soil should not be wet. In a room with low temperature, it can be watered for 10-15 days. Cold watering is stopped in cold weather, and soil is loose and moist in spring and autumn, which contributes to the decomposition of fertilizers and the supply of nutrients, but should not be too wet. Generally, water can be poured in 2 to 3 days, and the soil in the basin is dry and wet; summer temperatures are high. , It is also a period of vigorous flowering and flowering. It needs plenty of water, depending on the weather, it usually takes 1 to 2 days to pour water, and sprays water once a day in the morning and evening to increase the air humidity. The rainy season should be avoided. Open showers to avoid water soaking rot.

2. Appropriate fertilizer application The long-term and reasonable fertilizer and water management of alfalfa peanuts is the key to the growth and flowering of alfalfa. The flowering period of alfalfa is long and well maintained. It can be flowered 4 to 5 times per year from June to October, so it needs more nutrients. During the growing season, after each half-monthly application of a fully decomposed cake fertilizer with a concentration of 30%, combined with fertilization, the addition of 0.2% black wolfberry can regulate the pH of the basin soil and make the meat stem dark green. In the flowering and budding stage, stop applying nitrogen fertilizer and apply a bone powder or superphosphate to promote multiple flowers and flowers. After flowering, immediately apply fertilizer 1 or 2 times (1 week interval). Appropriate application of fertilizer and water can extend flowering time. . If there is too much fertilizer and the lack of light, the plant stems and legs will grow too long, it will also lead to less flowering or no flowering, and the rational use of fertilizers will make the plants grow robustly, and the flowers will bloom frequently and the fragrance will be rich.

3. The temperature and light are suitable for the warmth and semi-shadow environment, and it is not tolerant to cold. Therefore, the pots should be moved indoors and placed in a place facing south in scattered light. The indoor temperature is about 10°C. Below 5°C. Summer temperature can not exceed 35 °C, and avoid light exposure, the pot must be moved to ventilated cool place or pergola maintenance, or stems and buds are easy to shrink yellow. The optimum temperature for growth is from 15 to 20°C from March to September; from 12 to 18°C ​​from September to December; from 10 to 15°C from December to March of the following year.

4, to prevent pests harm summer, in a poorly ventilated environment prone to scale insects, with 5% Bordeaux mixture to prevent, or with 1% omethoate and 25% imidothiophosphate EC 1000 times spraying.

5. Change the flowering habits The time of flowering and flowering is at night. The length of flowering time is related to the temperature at that time. From July to August, it is open at night from 9 to 10 o'clock, and from 3 o'clock to 4 o'clock the next day, it fades. From 5:00 to 6 hours, from late September to October, it is mostly open at around 8:00 pm, and from 4 a.m. to 5 a.m. on the following day, it takes 8 to 9 hours. If you want to open the flowers during the day, you can use the daytime and nighttime lighting to reverse the domestication when the buds are enlarged. That is, when the buds grow to about 10 centimeters, the whole plant is covered with a black hood at 7 o'clock in the morning and the black cap is removed at 7 o'clock in the afternoon. It does not accept natural daylight and is placed under a lamp of 100 to 200 watts after dark. After 7-10 days, the flower can be opened from 7 am to 9 am and can be opened until 4:30 pm.

With the 4 Axis Dental Milling Machine, you can mill a single crown or small bridge quickly and economically. Affordably priced, the 4 Axis Dental Milling Machine is ideal for any lab just getting started in digital dentistry or those labs with scanners who no longer wish to outsource production. It's also the perfect addition to labs that need a second device for urgent jobs. The latest technological advancements in scanning, CAD/CAM software and CNC milling allow  dental labs to deliver custom production with speed and precision and enjoy optimal accuracy and repeatability. With the capability of precise milling and multiple application, the 4-Axis multifunctional Dental Milling machine provide a simple ,efficient ,and powerful dental CAD/CAM solution. The industry's most user-friendly desktop milling solution, the 4 Axis Dental Milling Machine compact dental mill, is at the forefront of this technological revolution.

4 Axis Dental Milling Machine

Cam Machine,Dental Model Trimmer,4Axis Dental Milling Machine,4 Axis Dental Cad Cam Milling Machine

Shandong Carved Intelligent Technology Group Co.,Ltd , https://www.demetdent.com