In fact, the use of the cutting machine is very safe, the operation method is also very simple, basically it will be a learning, bringing a lot of convenience to everyone's life, but even a small machine like a cutting machine, in everyday In life, you must also pay attention to maintenance to ensure its normal work.
The author here is to remind everyone that when the vegetable cutting machine is being repaired and repaired, it must first cut off the power supply before it can be repaired. After each use, it must be able to clean up in time, but clean up. When you are on the forehead, you can't use the sharper items to touch the conveyor belt and the pressing belt. It is unscientific to spray with a spray pipe.
It is necessary to frequently inspect the conveyor belt and the pressing belt. If it is loose, it should be adjusted in time, otherwise it will be easy to run off during use. If the tightness and wear of the V-belt have affected the use of the cutting machine, it is necessary to adjust and replace it in time.
Of course, it is necessary to regularly inject oil into the ratchet, gear and sprocket once. Use No. 20 engine oil. It is advisable to add 10 drops per time. The grease in the bearing can be added and replaced according to the usage. Calcium can be used. Base grease.
In fact, when the cutting machine is working, if the sound is not normal, it means that a certain part of the cutting machine has a problem. At this time, stop working immediately, check and repair it. After the troubleshooting, you can continue. Using a shredder is very convenient and efficient.