How to solve the problem of steam generator gas boiler flameout?
Gas-fired steam generator boilers have replaced the traditional coal-fired boilers and have been warmly welcomed by the public. Gas-fired boilers are no exception. In the process of using gas-fired boilers, what happens when there is a flameout?
Xuen steam generator experts said that the gas boiler has been turned off, which may be caused by a sudden rise in gas pressure, or because the wrong operation interrupts the supply of gas, causing the gas boiler to stall. In order to solve this phenomenon, Xuen steam generator manufacturers recommend:
1. Immediately after the gas boiler is turned off, the fuel supply should be cut off, the valve of the gas supply should be closed, and the fuel supply valve of the burner should be closed to prevent a safety accident.
2. Shut down to find out the cause of the gas-fired hot water boiler stalling. For the cause, correct the problem with the right medicine, and confirm that there is no problem before starting the operation. Before starting, strengthen the boiler through-air purge. The purge time is more than 5 minutes. When ignition, do not directly send fuel to the high-temperature furnace to prevent the furnace from exploding. Use ignition equipment to ignite. If it is caused by the failure of the fan, the fuel supply valve should be closed immediately. After the fault is removed, the boiler is started according to the operating procedure.
Xuen steam generator manufacturers here also remind the majority of gas hot water boiler users, once the gas hot water boiler flameout phenomenon, in order to prevent the occurrence of some safety accidents, it is necessary to stop in time, investigate the cause of the flameout phenomenon, and then take timely measures for the reasons Measures and solve them.
Specifications
These urine reagent strips are available for manual reading or for use with analyzers. The manual urine reagent strips ensure easy visual reading and give a complete solution for urinalysis. There are various configurations available to suit different needs. New parameters are under development. The urine reagent strips for use with analyzers have a unique check block on every strip and have a much higher reliability with an ascorbic acid parameter.
Pool Tester,Water Test Strips,Water Quality Tester,Water Hardness Test Kit
Changchun LYZ Technology Co., Ltd , https://www.lyzstrips.com