The paddle dryer is contacted by a heat carrier and a material that needs to be dried to achieve the purpose of drying. The common heat carriers in zui are generally steam and are dried by agitation of the blades in the paddle dryer. Below, the installation and commissioning of the lower blade dryer will be described.
1. Before installation, check that the parts are intact and clean the inside.
2. After installation, check whether the grease has been injected into the bearing housing before commissioning. Otherwise, the appropriate amount of grease should be added. Generally, the molybdenum disulfide compound calcium base grease or other high temperature resistant grease is used.
3. Before installing the rotary joint, carefully read the rotary joint "Instruction Manual" and install it correctly to prevent damage to the gasket.
4. Pressure gauge and voltage regulator should be installed on the heating or cooling medium inlet line. A safety valve must be installed in front of the inlet to prevent overpressure of the equipment. The temperature of the heating medium must not exceed the rated service temperature.
5. For the rotary joint with single-end configuration at the end of the shaft, it should be noted that the surface within 200 mm of the end of the nozzle extending into the inner cavity should be smooth and non-porous, free from rust and slag, and can be heated (or Cooling) The sealing requirements of the media are of a suitable size. As with the double-end installation of the rotary joint, the machine must be tested without leaking.
6. Check and debug the gear drive or chain drive to meet the mechanical transmission requirements.
7. Perform a safety check on the motor and electrical appliances of the paddle dryer. Touch the motor power switch, the motor and transmission parts should be free of jamming, and make sure that the spindle is turning correctly (the blade should be pointed forwards when the blade rotates).
8. Start the motor so that the paddle dryer runs at no load, the operation should be smooth, and no abnormal noise should occur. For speed control devices, the speed should be adjusted within the adjustable range. When accelerating, the speed should be slow to check whether the speed regulation characteristics meet the requirements. No more than 30 minutes of no-load operation.
9. Gradually heat or cool, observe the operation, and make the heat source or cold source reach the use parameters. Equipment with cooling protection must open the cooling water valve before steaming. Gradually add materials, observe and check the drying condition of the materials, and continuously adjust the feeding amount, heat (cold) source quantity, discharge amount and rotation speed according to the needs, and then put into normal operation after reaching the design requirements.
If you are interested in our paddle dryer , you are welcome to visit the site and bring it to the factory for testing. We look forward to seeing you!

Fibres

1. High-quality raw materials
Our fiber products use natural plant cellulose as the main raw material, and all raw materials are strictly screened and tested. We select the best plant cellulose to ensure the quality and stability of our products. Our company works with reliable suppliers to ensure the freshness and purity of raw materials. We firmly believe that only by using high-quality raw materials can we produce high-quality products.

2. Multiple ingredients, more comprehensive nutrition
Our fiber products contain multiple ingredients, including plant fiber, fruit and vegetable enzymes, probiotics, and fruit and vegetable nutrients. These multiple ingredients are nutrients that the human body needs daily. By supplementing these nutrients, our products can provide the human body with more comprehensive nutritional supplies and help people maintain good health.

3. Scientific proportion and reasonable matching
Our fiber products adopt scientific proportions and reasonably combine various nutrients. These ingredients have been widely studied and proven to have significant effects on human health. Through precise proportions and manufacturing processes, our products provide optimal absorption, making it easy to achieve nutritional balance.

4. Mild and safe, no side effects
Our fiber products use pure natural plant extracts and do not contain any artificial additives or chemical ingredients. We strictly follow international food safety standards to ensure the mildness and safety of our products. Compared with traditional drugs, our products will not cause dependence and side effects and are a safe and reliable choice. Whether you're seeking health or needing fiber, our products have what you need.

5. Improve intestinal health and enhance immunity
Our fiber products help improve intestinal health and enhance body immunity by supplementing the nutrients needed by the intestines. The intestine is one of the most important organs of the human body and an important part of the immune system. Our products can help remove harmful substances from the intestines and promote the growth of beneficial bacteria, thereby enhancing the body's immunity.

6. Reduce fat absorption and create a beautiful figure
Our fiber products can reduce fat absorption, thereby achieving a body-shaping effect. Too much fat in the body can lead to obesity, high blood pressure and other health problems. Our products can effectively control the body's absorption of fat and help consume excess fat, thereby achieving weight loss results.

7. Delicious, convenient and easy to take
Our fiber products taste great and are easy to take. Whether you are at home or at work, you can take it anytime and anywhere. Our products can be consumed directly or mixed with other beverages. Whether you are a busy office worker, housewife or student, our products can meet your needs.

8. Personalized selection to meet different needs
Our company understands that everyone's body needs are unique, so we offer a variety of fiber products to meet the needs of different groups of people. Whether you need to improve your gut health or lose weight and get in shape, we have a product for you. We believe that through personalized selection, you can find the fiber solution that best suits you.

9. Quality assurance, choose with confidence
Our company is always customer-oriented and committed to providing high-quality fiber products. We have advanced production equipment and strict quality inspection processes to ensure that each batch of products meets high standards through multiple inspections and verifications. Our products undergo strict quality assurance, allowing you to choose with confidence.

 fiber supplement powder psyllium husk powder metamucil powder prebiotic fiber supplement organic fiber supplement

Xi'an complex bio-tech CO.,LTD. , https://www.complexpowder.com