This machine is a three-pressure automatic rotating , continuous tableting machine that compresses granular raw materials into wafers, lettering and shaped, two-color tablets. It is mainly used for tablet production, and is also suitable for chemical, food, electronics and other industrial enterprises.
Structural Features 1 The outer casing is fully enclosed, the material is made of stainless steel, and the internal countertop is made of stainless steel, which can maintain the surface gloss and prevent cross-contamination, in line with GMP requirements.
2 With a transparent protective cover, the state of the tablet can be clearly observed, and the side panels can be fully opened for easy internal cleaning and maintenance.
3 All controllers and operating parts are laid out reasonably, and the man-machine interface variable frequency speed control device is used for electric speed regulation and anti-reverse rotation.
4 easy to operate, stable rotation, safe and accurate. Implement electromechanical integration, using touch screen PLC control and operation.
5 The transmission system is sealed in the oil tank below the main body of the machine. It is a completely separate and independent component, and it will not pollute each other, and it is easy to dissipate heat and wear.
6 The machine is equipped with a dust suction device, which can absorb the dust flying in the pressing chamber.
7 This machine has high pressure and can adapt to the production of various large and small pieces and difficult-to-form tablets. It is an ideal equipment for tablet production. Product Description This machine is a three-pressure automatic rotating, continuous tableting machine that presses granular raw materials into wafers, lettering and shaped, two-color tablets. It is mainly used for tablet production, and is also suitable for chemical, food, electronics and other industrial enterprises.
Product Description The three-color tablet presser is used to press various granular material into a sheet shape, and in addition to the wafer, it can also press various geometric shapes of the shaped piece and the double-sided lettering piece. The structure is double-pressed, with two sets of feeding devices and two sets of pressure rollers. The rotary table can be equipped with 2525 active rams. After one rotation, the active ram can be pressed and rotated for one week to suppress 5050 pieces. Therefore, it is suitable for mass production. The speed of the turntable, the filling depth of the material, the thickness of the tablet, and the height of the undershoot can be adjusted during tableting. A separate suction box is attached, and the dust generated by the machine operation can be sucked through the suction pipe and the suction nozzle to avoid the dust adhesion and blockage, and the raw materials can be recycled and reused.
Structural Features 1 The outer casing is fully enclosed, the material is made of stainless steel, and the internal countertop is made of stainless steel, which can maintain the surface gloss and prevent cross-contamination, in line with GMP requirements.
2 With a transparent protective cover, the state of the tablet can be clearly observed, and the side panels can be fully opened for easy internal cleaning and maintenance.
3 All controllers and operating parts are laid out reasonably, and the man-machine interface variable frequency speed control device is used for electric speed regulation and anti-reverse rotation.
4 easy to operate, stable rotation, safe and accurate. Implement electromechanical integration, using touch screen PLC control and operation.
5 The transmission system is sealed in the oil tank below the main body of the machine. It is a completely separate and independent component, and it will not pollute each other, and it is easy to dissipate heat and wear.
6 The machine is equipped with a dust suction device, which can absorb the dust flying in the pressing chamber.
7 This machine has high pressure and can adapt to the production of various large and small pieces and difficult-to-form tablets. It is an ideal equipment for tablet production. Product Description This machine is a three-pressure automatic rotating, continuous tableting machine that presses granular raw materials into wafers, lettering and shaped, two-color tablets. It is mainly used for tablet production, and is also suitable for chemical, food, electronics and other industrial enterprises.
Product Description The three-color tablet presser is used to press various granular material into a sheet shape, and in addition to the wafer, it can also press various geometric shapes of the shaped piece and the double-sided lettering piece. The structure is double-pressed, with two sets of feeding devices and two sets of pressure rollers. The rotary table can be equipped with 2525 active rams. After one rotation, the active ram can be pressed and rotated for one week to suppress 5050 pieces. Therefore, it is suitable for mass production. The speed of the turntable, the filling depth of the material, the thickness of the tablet, and the height of the undershoot can be adjusted during tableting. A separate suction box is attached, and the dust generated by the machine operation can be sucked through the suction pipe and the suction nozzle to avoid the dust adhesion and blockage, and the raw materials can be recycled and reused.
Product categories of TB500 Powder, we are specialized manufacturers from China, Tb500 Powder, Cas 137525-51-0 Bpc Peptides suppliers/factory, wholesale high-quality products of Bpc Peptides Powder 2Mg R & D and manufacturing, we have the perfect after-sales service and technical support. Look forward to your cooperation!
Tb500 Powder,Cas 137525-51-0 Bpc Peptides,Bpc Peptides Powder 2Mg,2Mg Bpc Peptide 5Mg
Shaanxi YXchuang Biotechnology Co., Ltd , https://www.peptidenootropics.com